powerhost.blogg.se

Which is right and left side of trailer
Which is right and left side of trailer




  1. #Which is right and left side of trailer install#
  2. #Which is right and left side of trailer mod#

#Which is right and left side of trailer mod#

I also know my neighbors Yukon won't work properly without a pricey dealer only mod as well. Thankfully I was given one by someone who sold their van. No trailer lights will work properly without this pricey harness. At the connection behind each tail lamp the new harness contains about 6 different relays on each side.

#Which is right and left side of trailer install#

It requires you to remove the tail lamps, unplug the electrical plugs for the lamps, install a jumper connection on each side of the car, and then run the harness behind the rear trim panels and out to the trailer hitch. My Dodge minivan requires a $250 dealer only jumper harness in order for the trailer lights to work properly. The days of just crimping into the tail light harness are long gone. Many vehicles require additional wiring and / or components for the trailer wiring to work properly due to the computer controls of the vehicle in question. Is this a new vehicle + trailer set up? Did you ever have it where all the lighting worked properly? If the first answer is yes and the second is no, then consult the owners manual for your Cherokee. Re: left turn signal and brake light not working on trailer Just to be sure, I also eliminated the connector by bypassing it.Īny ideas? I've spent a lot of time to get this far.

which is right and left side of trailer

Does the flasher have anything at all to do with the brake light? If not, then I'm guessing it's the converter. I'm thinking it's either the vehicle flasher or the converter. I've seen that mentioned as a fairly common symptom. My blinkers are not running fast when I connect to the trailer. So that shows my trailer wiring and lights and I assume ground must all be good. If I swap wires - connect yellow truck to green trailer and green truck to yellow trailer, the problem moves with the swap. If I then plug it into the trailer and retest with the light tester, I get a very, very dim response from the turn signal with the light tester. If I use a light tester to test the plug on the truck side (Jeep Cherokee 2001), everything seems fine and I have a signal on the yellow wire when I'm supposed to. I've eliminated everything on the trailer. Everything else - both running lights, right brake, right signal, works. My left turn signal and left brake light are not working on my trailer.






Which is right and left side of trailer